How to Reset Steering Servo on Traxxas Slash? Reset in Seconds!

Tired of automatic steering on Traxxas slash? Or, Looking for a straight movement of the RC?

Resetting the steering servo is the only solution as it helps to center the servo as well as line up the wheels straight. Hence, it solves issues like automatic steering and ensures proper movement of the Traxxas slash on the racetrack.

When you’re spending hours on the racetrack, the servo steering of the Traxxas may get stuck or malfunction. It causes issues like automatic steering or slight defects in straight movement. To get rid of such issues, you have to reset the sterling servo by detaching the servo, centering it properly, and checking the performance. 

If you want more clarification about how to reset steering servo on Traxxas slash, go through our detailed guide for a quick clarification and reset the servo in seconds!

How to Reset Steering Servo on Traxxas Slash

When it comes to resetting the steering servo, the process is more technical than time-consuming. Check the steering servo connection, detach the servo, center the servo, attach the servo, and check the performance. It is better to follow the reset process step by step. Let’s dig into these steps in detail.

Remove The Body

First of all, power off the RC and look for the body type. If the Traxxas comes with a clipping body, then remove the clips with gentle pressure. Some of the modified models include a body latching system. 

Now, turn the handle of the latch 90° counterclockwise to open it. After that, release the car body and keep it aside. Turning off the power will help to avoid short circuits while resetting the steering servo.

Check the Steering Servo Connection

Most of the time, the servo malfunction due to a loose connection. That is why the next step is to retrieve the connection of the receiver box. To check the connection, open the wire clamp and receiver box cover first. Next, unplug the stock servo from channel one or the CH1 slot.

Once you’re done with the unplugging, reverse the whole process to plug the stock servo again. Make sure that no wires are bound or overlapping in the receiver box. If the steering servo is not working, then you need to center the steering servo of the RC car.

Detach the Servo 

To detach the servo from the steering system, turn over the car first. Then, look for a single screw on the connector. If you find the screw, just simply unscrew it. After that, push the connector to pop it off. It will completely detach the servo from the car. 

Center the Steering Servo

After detaching the servo, plug the car into the batteries and turn it on. Make sure the car is still connected to the radio system. 

Now, it’s time to center the servo. Let’s go to the transmitter and ensure the trim of the controller is in the center. As long as getting the position, check it down so that you can trim it later if needed. Then, center the steering servo and ensure that the wheels are lined up straight.

Once you’ve lined the wheels up, it’s time to place the steering part on the servo. When the part is perfectly set on the servo, twist it a little bit to get the exact line-up. If you’re not getting an exact position, keep it as straight as possible. 

Attach the Steering Servo 

It is quite hard to center the servo. This process may take a little bit of time. But, when you see the wheels are now lined up straight, take care of the screw quickly. 

Even after attaching the servo, the steering may look a little bit wonky. In fact, it may come with a little bit of tail-out that makes the steering of the car wonky. However, it’s my guarantee that the steering is lined up perfectly with an exact position.

Checking up the Servo

Finally, it’s time to check the servo. Check whether the wheels are equal on both sides or one way. If the steering is perfectly lined up, then the Traxxas slash is ready to heat the racetrack. but, if the steering doesn’t sound quite sharp or still requires some accuracy, we suggest you repeat the centering process again.

How to Upgrade Steering Servo on Traxxas Slash

First, remove the clips or release the car body with gentle pressure. Turn off the power of the Traxxas to avoid short circuits while upgrading the steering servo. Next, check the connection of the receiver box. Open the wire clamp & receiver box cover to unplug the stock servo from the channel one or CH1 slot. 

If you’re done with the unplugging, remove the original servo from the chassis. Take any of the latest servo models like 2055. We suggest this model as it features brushless power including a waterproof design. As a result, it can ensure ultimate control and years of durability.

After that, take the wire under the chassis to prevent the wire from bounding or any kind of overlapping. Plug the wire into the CH1 or channel 1 slot into the receiver box. It is better to push the rubber gasket gently to ensure proper fittings. 

Then, properly center the steering servo and ensure that the wheels are lined up straight. After lining the wheels, it is time to place the steering part and twist it a little bit to get the exact line-up. When the wheels are now lined up perfectly, screw it quickly. 

Sometimes, the servo comes with a little bit of tail-out, making the steering of the car wonky. Trust me, the steering is lined up perfectly with an exact position. Finally, turn the power on and install the RC body. The upgrade is done and your Traxxas Slash is ready to rule the racetrack. 

Frequently Asked Questions:

Why Does My Traxxas Steering Turn Automatically? 

It happens due to the malfunctioning of the servo or driving the car for a longer time. If such an issue arises, reset the servo or whole RC. If you still have some related issues, go through the Traxxas Steering Servo Problems for a quick clarification.

Why Is My Rc Car Moving but Not Turning?

Loose or damaged connections on the receiver box. Open the box and reconnect the wire to fix such issues. If the car is still not turning, then change the steering servo to solve the turning issues. 

What Size of Hex Drivers Needed for Steering Servo Upgrade?

It depends on the servo & RC model. But, on average, 2.5 mm and 2 mm hex drivers are ideal for installing or upgrading the steering servo.

Warp Up

Finally, we have made it to the end. As we covered a detailed process about how to reset steering servo on Traxxas slash, we hope this article will help you to reset the server quickly.

On top of that, we covered some related issues that may help you while dealing with a Traxxas RC. So, follow these steps carefully right now to reset the steering servo & get to the racetrack within a few minutes!